Storing the tire sealant and compressor kit, Tire changing, Storing the tire sealant and – Buick 2011 Enclave User Manual

Page 360: Compressor kit -68, Tire changing -68, These marks, 68 vehicle care

Advertising
background image

Black plate (68,1)

Buick Enclave Owner Manual - 2011

10-68

Vehicle Care

Storing the Tire Sealant
and Compressor Kit

The tire sealant and compressor
kit is located in the storage
compartment on the driver side,
at the rear of the vehicle.

1. Press down on the latch tab and

pull the cover off to access the
storage compartment.

2. Press the two tabs on the quick

release buckle to release the tire
sealant and compressor kit
strap.

3. Remove the sealant and

compressor kit from its tray.

To store the tire sealant and
compressor kit, reverse the steps.

Tire Changing

Removing Tools

The tools needed to remove the
spare tire are located in the storage
compartment on the driver side, at
the rear of the vehicle.

1. Open the jack storage

compartment by pulling on the
latch tab, located toward the rear
of the vehicle, and pulling the
cover off.

A. Tool Bag

B. Wing Bolt

C. Jack

2. Remove the wing bolt (B) by

turning it counterclockwise.

3. Push the jack (C) up out of the

holding bracket and remove the
tool bag (A).

4. Turn the jack on its side, with the

bottom facing toward you.

5. Pull the jack straight out, bottom

first.

Advertising