Windshield replacement, Headlamp aiming, Aiming -27 – Buick 2011 Enclave User Manual

Page 319: Windshield replacement -27

Advertising
background image

Black plate (27,1)

Buick Enclave Owner Manual - 2011

Vehicle Care

10-27

3. Install the new wiper blade and

make sure the wiper blade locks
into place.

For the proper size and type see
Maintenance Replacement Parts on
page 11‑8
.

Backglass Wiper Blade

To replace the backglass wiper
blade:

1. Pull the wiper blade assembly

away from the backglass.

The backglass wiper blade will
not lock in a vertical position
so care should be used when
pulling it away from the vehicle.

2. Rotate the wiper blade

assembly, hold the wiper arm in
position, and push the blade
away from the wiper arm.

3. Replace the wiper blade.

4. Return the wiper arm and blade

assembly to the rest position on
the glass.

Windshield Replacement

The vehicle is equipped with an
acoustic windshield. If you ever
have to have the windshield
replaced be sure to get an acoustic
windshield so you will continue to
have the benefits an acoustic
windshield can provide.

Headlamp Aiming

Headlamp aim has been preset at
the factory and should need no
further adjustment.

However, if your vehicle is damaged
in a crash, the headlamp aim may
be affected. Aim adjustment to the
low-beam headlamps may be
necessary if oncoming drivers flash
their high-beam headlamps at you
(for vertical aim).

If the headlamps need to be
re-aimed, it is recommended that
you take the vehicle to your dealer
for service.

Advertising