Headlamp high/low-beam changer, Flash-to-pass, Daytime running lamps (drl) – CHEVROLET 2013 Camaro User Manual

Page 150: Headlamp high/ low-beam changer, 2 lighting

Advertising
background image

Black plate (2,1)

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

6-2

Lighting

A warning chime sounds if the driver
door is opened when the ignition
switch is off and the parking lamps
are on.

5

(Headlamps): Turns the

headlamps on together with the
lamps listed below.

.

Parking Lamps

.

Taillamps

.

Sidemarker Lamps

.

License Plate Lamps

.

Instrument Panel Lights

A warning chime sounds if the driver
door is opened when the ignition
switch is off and the headlamps
are on.

#

(Front Fog Lamps): Turns the

fog lamps on or off. The fog lamps
come on together with the following:

.

Parking Lamps

.

Taillamps

.

Sidemarker Lamps

.

License Plate Lamps

.

Instrument Panel Lights

See Front Fog Lamps on page 6‑5.

Headlamp High/
Low-Beam Changer

Push the turn signal/lane change
lever away from you and release, to
turn the high beams on. To return to
low beams, push the lever again or
pull it toward you and release.

This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.

Flash-to-Pass

The flash‐to‐pass feature works with
the low beams or Daytime Running
Lamps (DRL) on or off.

To flash the high beams, pull the
turn signal/lane change lever all the
way toward you, then release it.

Daytime Running
Lamps (DRL)

Daytime Running Lamps (DRL) can
make it easier for others to see the
front of your vehicle during the day.
Fully functional Daytime Running
Lamps are required on all vehicles
first sold in Canada.

A light sensor on top of the
instrument panel makes the DRL
work, so be sure it is not covered.

Advertising