Driving and operating 9-27 – CHEVROLET 2013 Camaro User Manual

Page 219

Advertising
background image

Black plate (27,1)

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Driving and Operating

9-27

To rock the vehicle back and forth to
get out of snow, ice, or sand without
damaging the transmission, see If
the Vehicle Is Stuck on page 9‑11
.

N (Neutral): In this position, the
engine does not connect with the
wheels. To restart the engine when
the vehicle is already moving, use
N (Neutral) only. Also, use
N (Neutral) when the vehicle is
being towed.

{

WARNING

Shifting into a drive gear while the
engine is running at high speed is
dangerous. Unless your foot is
firmly on the brake pedal, the
vehicle could move very rapidly.
You could lose control and hit
people or objects. Do not shift
into a drive gear while the engine
is running at high speed.

Notice: Shifting out of P (Park) or
N (Neutral) with the engine
running at high speed may

damage the transmission. The
repairs would not be covered by
the vehicle warranty. Be sure the
engine is not running at high
speed when shifting the vehicle.

D (Drive): This position is for
normal driving. It provides the best
fuel economy. When the ZL1 is in
D (Drive), the first shift after start will
be from 1 (First) gear. Following
starts will begin in 2 (Second) gear.

If more power is needed for
passing, and the vehicle is:

.

Going less than 56 km/h
(35 mph), push the accelerator
pedal about halfway down.

.

Going about 56 km/h (35 mph) or
more, push the accelerator all
the way down.

Powertrain Braking (V6 and
V8 Engines Except ZL1)

When driving on steep descents
with the shift lever in D (Drive) or
M (Manual Mode) where frequent
braking is required, the transmission
will shift down a gear to help hold

vehicle speed and reduce brake
wear. If the driver continues to press
the brake, the transmission will
downshift until 3 (Third) gear is
reached.

If the brake is released for some
time, the transmission will upshift a
gear. If the road levels out and the
accelerator pedal is pressed, the
transmission will upshift until the
appropriate gear is reached.

Notice: If the vehicle seems to
accelerate slowly or not shift
gears when you go faster, and
you continue to drive the vehicle
that way, you could damage the
transmission. Have the vehicle
serviced right away.

M (Manual Mode): This position
allows the driver to select gears
appropriate for current driving
conditions.

With the shift lever in M (Manual
Mode) position, vehicles with axle
code GW8 will enter ERS Mode.
See Manual Mode on page 9‑29.

Advertising