Keys, doors, and windows 2-21 – CHEVROLET 2013 Camaro User Manual

Page 47

Advertising
background image

Black plate (21,1)

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Keys, Doors, and Windows

2-21

5. Locate the pressure release bolt

on the top of the hydraulic pump.

6. Using the provided wrench, turn

the pressure release bolt
counterclockwise no more than
one turn.

7. Reinstall the trim cover.

8. Pull the front of the convertible

top up and forward.

9. After the convertible top is

completely raised, release the
convertible top front latch from
the lock position by pulling down
and turning it clockwise.

10. Lock the convertible top front

latch by pulling down and
turning it counterclockwise,
then push it up.

When power is restored to the
vehicle, the pressure release bolt
must be tightened using the
provided wrench, by turning it

clockwise. The convertible top
button can then be used to lower or
raise the convertible top.

If the convertible top is operated
multiple times, the engine should be
running to prevent drain on the
vehicle's battery. Under certain
conditions, the Driver Information
Center (DIC) may display a
message regarding the convertible
top. See Convertible Top Messages
on page 5‑34
.

If the battery has been
disconnected, the power windows
must be initialized for the
convertible top to operate. See
Power Windows on page 2‑14.

Cleaning the Convertible Top

The convertible top should be
cleaned often. High pressure car
washes may cause water to enter
the vehicle.

Hand wash the convertible top in
the shade. Use a mild soap,
lukewarm water, and a soft sponge.
A chamois or cloth may leave lint on

Advertising