30 driving and operating – CHEVROLET 2013 Camaro User Manual

Page 222

Advertising
background image

Black plate (30,1)

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

9-30

Driving and Operating

While in M (Manual Mode), the
transmission will prevent shifting to
a lower gear if the engine speed is
too high. If the tap down − (Minus)
button is held while the vehicle
slows down, the M in the DIC will
flash, and the downshift will be
allowed when vehicle speed is low
enough. Continuing to hold the tap
down − (Minus) button will not cause
the transmission to continue
downshifting. Each downshift must
be requested separately by
releasing and reapplying the tap
down − (Minus) button.

English

Metric

ZL1 vehicles equipped with a
Head-Up Display (HUD) also have
shift timing lights across the top of
the display. As you approach a shift
point, the row of lights grow closer
together. The transmission should
be shifted before the lights come
together in the middle of the display.
If the lights begin flashing, you have
exceeded the shift point. Shift
immediately.

See Driver Information Center (DIC)
on page 5‑24
and Head-Up Display
(HUD) on page 5‑28
.

When in Tap Shift Mode, the driver
can exit Tap Shift by holding the
right (upshift) control for
two seconds. The transmission will
return to automatic shifting.

The driver may choose to briefly
enter Tap Shift Mode while in
D (Drive). Tapping either the upshift
or downshift control will place the
transmission in Tap Shift Mode. The
driver may then exit Tap Shift Mode
by holding the upshift control for
two seconds. The system will return
to automatic shifting after
10 seconds of cruising at a steady
speed, or when the vehicle comes
to a stop.

The driver may use this for sport
driving or when climbing or
descending hills, to stay in gear
longer, or to downshift for more
power or engine braking. The
transmission will only allow you to
shift into gears appropriate for the

Advertising