Starting the engine, Starting the engine -29, Brakes – CHEVROLET 2011 Suburban User Manual

Page 309: Driving and operating 9-29

Advertising
background image

Black plate (29,1)

Chevrolet Tahoe/Suburban Owner Manual - 2011

Driving and Operating

9-29

In an emergency:

1. Brake using a firm and steady

pressure. Do not pump the
brakes repeatedly. This may
deplete power assist, requiring
increased brake pedal force.

2. Shift the vehicle to neutral. This

can be done while the vehicle is
moving. After shifting to neutral,
firmly apply the brakes and steer
the vehicle to a safe location.

3. Come to a complete stop, shift

to P (Park), and turn the ignition
to LOCK/OFF. On vehicles with
an automatic transmission, the
shift lever must be in P (Park) to
turn the ignition switch to the
LOCK/OFF position.

4. Set the parking brake. See

Parking Brake on page 9‑51.

The steering can bind with the
wheels turned off center. If this
happens, move the steering wheel
from right to left while turning the

key to ACC/ACCESSORY. If this
doesn't work, then the vehicle
needs service.

Notice: Using a tool to force the
key to turn in the ignition could
cause damage to the switch or
break the key. Use the correct
key, make sure it is all the way in,
and turn it only with your hand.
If the key cannot be turned by
hand, see your dealer.

B (ACC/ACCESSORY): This
position lets things like the radio
and the windshield wipers operate
while the engine is off. Use this
position if the vehicle must be
pushed or towed.

C (ON/RUN): This position can
be used to operate the electrical
accessories and to display some
instrument panel cluster warning
and indicator lights. The switch
stays in this position when the
engine is running. The transmission
is also unlocked in this position on
automatic transmission vehicles.

If you leave the key in the ACC/
ACCESSORY or ON/RUN position
with the engine off, the battery could
be drained. You may not be able to
start the vehicle if the battery is
allowed to drain for an extended
period of time.

D (START): This is the position that
starts the engine. When the engine
starts, release the key. The ignition
switch returns to ON/RUN for
driving.

A warning tone will sound when
the driver door is opened and the
ignition is in ACC/ACCESSORY or
LOCK/OFF, and the key is in the
ignition.

Starting the Engine

If the vehicle is a hybrid, see the
hybrid supplement for more
information.

Move the shift lever to P (Park) or
N (Neutral). The engine will not start
in any other position. To restart the
engine when the vehicle is already
moving, use N (Neutral) only.

Advertising