CHEVROLET 2011 Suburban User Manual

Page 343

Advertising
background image

Black plate (63,1)

Chevrolet Tahoe/Suburban Owner Manual - 2011

Driving and Operating

9-63

WARNING (Continued)

Your judged distances using the
screen will differ from actual
distances.

If you do not use proper care
before backing up, you could
hit a vehicle, child, pedestrian,
bicyclist, or pet, resulting in
vehicle damage, injury, or death.
Even though the vehicle has the
RVC system, always check
carefully before backing up by
checking behind and around the
vehicle.

Vehicles Without Navigation
System

The rear vision camera system is
designed to help the driver when
backing up by displaying a view
of the area behind the vehicle.

When the key is in the ON/RUN
position and the driver shifts the
vehicle into R (Reverse), the video
image automatically appears on the
inside rear view mirror. Once the
driver shifts out of R (Reverse),
the video image automatically
disappears from the inside rear
view mirror.

Turning the Rear Vision Camera
System Off or On

To turn off the rear vision camera
system, press and hold

z

, located

on the inside rearview mirror, until
the left indicator light turns off. The
rear camera vision display is now
disabled.

To turn the rear vision camera
system on again, press and hold

z

until the left indicator light
illuminates. The rear vision camera
system display is now enabled and
the display will appear in the mirror
normally.

Vehicles With Navigation
System

The rear vision camera system is
designed to help the driver when
backing up by displaying a view of
the area behind the vehicle. When
the driver shifts the vehicle into
R (Reverse), the video image
automatically appears on the
navigation screen. Once the driver
shifts out of R (Reverse), the
navigation screen will go back to the
last screen that had been displayed,
after a delay.

Turning the Rear Vision Camera
System On or Off

To turn the rear vision camera
system on or off:

1. Shift into P (Park).

2. Press the MENU button to enter

the configure menu options, then
press the MENU hard key to
select Display or touch the
Display screen button.

Advertising