Immobilizer operation, Immobilizer operation -16, 16 keys, doors and windows – CHEVROLET 2011 Suburban User Manual

Page 54

Advertising
background image

Black plate (16,1)

Chevrolet Tahoe/Suburban Owner Manual - 2011

2-16

Keys, Doors and Windows

Immobilizer Operation

This vehicle has PASS-Key

®

III+

(Personalized Automotive Security
System) theft-deterrent system.
PASS-Key III+ is a passive
theft-deterrent system.

The system is automatically armed
when the key is removed from the
ignition.

The system is automatically
disarmed when the key is turned
to ON/RUN, ACC/ACCESSORY,
or START from the LOCK/OFF
position.

You do not have to manually arm
or disarm the system.

The security light will come on if
there is a problem with arming or
disarming the theft-deterrent
system.

When the PASS-Key III+ system
senses that someone is using the
wrong key, it prevents the vehicle
from starting. Anyone using a
trial-and-error method to start the
vehicle will be discouraged because
of the high number of electrical key
codes.

If the engine does not start and the
security light on the instrument
panel cluster comes on when trying
to start the vehicle, there may be a
problem with the theft-deterrent
system. Turn the ignition off and try
again.

If the engine still does not start, and
the key appears to be undamaged,
try another ignition key. At this time,
you may also want to check the
fuse. See Fuses and Circuit
Breakers on page 10‑39
.
If the
engine still does not start with the
other key, the vehicle needs service.

If the vehicle does start, the first key
may be faulty. See your dealer who
can service the PASS-Key III+ to
have a new key made.

It is possible for the PASS-Key III+
decoder to learn the transponder
value of a new or replacement key.
Up to 10 keys may be programmed
for the vehicle. The following
procedure is for programming
additional keys only. If all the
currently programmed keys are lost
or do not operate, you must see
your dealer or a locksmith who can
service PASS-Key III+ to have keys
made and programmed to the
system.

See your dealer or a locksmith who
can service PASS-Key III+ to get a
new key blank cut exactly as the
ignition key that operates the
system.

Advertising