Audible signals, To choose between high and low volume signals – Whirlpool RBS307PD User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R O V E N

Audible signals

Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.

To shut off all signals except for error
tones and the hidden function signal:

Press and hold the Stop Time pad for

5 seconds. A short tone will sound
to tell you the signals have been
changed. “Snd” and “On" or “Snd”
and “Off” will appear on the
display.

Repeat the above step to turn the signals

back on.

To choose between high and low
volume signals:

Press and hold the Delay Start Time pad

for 5 seconds. A short tone will
sound to tell you the signals have
been changed. Either “HI” and
“Snd” or “LO” and “Snd" will
appear on the time display to

show the volume you chose. If the volume is
changed while the audible signals are off,
when signals are turned back on they will be
at the volume setting chosen.

12

Advertising
This manual is related to the following products: