Whirlpool RBS307PD - Manual (Page 17)

1. Press and hold Bake pad for
5 seconds.
The display will show the current offset
temperature, for example “0”, if you have
not previously adjusted the temperature.
U S I N G Y O U R O V E N
PRESS YOU SEE
r r r O i
L I I L
(factory setting of “0”)
2. Set new offset temperature.
Press A to raise the temperature or ▼ to
lower the temperature in 10°F amounts.
You can set the temperature change to
as low as -30°F or as high as +30°F. A
minus (-) sign will appear before the
number when decreasing the tempera­
ture setting to show the oven will be
cooler by the displayed amount. There is
no sign in front of the number when
increasing the temperature setting.
PRESS
TEMP
YOU SEE
t r r
I U f
r O I
L I I L
(example when making oven
10°F hotter)
3. Enter the adjustment.
PRESS YOU SEE
o - z i n
(time of day)
How to determine the amount of adjustment needed
The chart at the right tells you how much to
adjust the offset temperature to get the
desired cooking results. You can determine
cooking results by the amount of browning,
moistness, and rising times for baked foods.
TO MAKE FOOD...
ADJUST BY THIS
NUMBER OF
DEGREES
A little more done +10°F/+6°C
Moderately more done +20°F/+12°C
Much more done
+30°F/+16°C
A little less done - 10°F/-6°C
Moderately less done -20°F/-12°C
Much less done -30°F/-16°C
To display temperatures in °C instead of °F:
Press and hold the Custom Broil pad for 5
seconds. A short tone will sound and
the temperatures displayed will be
converted. To switch back to °F,
repeat the instructions above.
CUSTOM
BROIL
NOTE: The temperature display will go off
after a conversion. The temperature display
will reappear the next time you press a cook
function command pad.
17