To delay start and stop automatically, Method 1-using cook time and delay start time, Prepare oven – Whirlpool RBS307PD User Manual
Page 25: Choose setting, Press you see, Set temperature (optional), Press cook time pad, Set cook time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R O V E N
To delay start and stop automatically:
Method
1-Using
Cook
Time
and Delay Start Time:
1. Prepare oven.
Position the oven rack(s) properly and
put food in the oven. For correct rack
placement, see “Positioning racks and
pans” on page 7.
2. Choose setting.
NOTE: On single/upper ovens, you can
set the oven for convection baking by
pressing CONVECT instead of BAKE.
PRESS YOU SEE
rnrr??'
t n - n n
u
Z
u u
(example for
bake)
3. Set temperature (optional).
Do this step if you want to set a tempera
ture other than 350°F. Press
A to raise
the temperature or
T to lower the
temperature in 5°F amounts. Use these
pads until the desired temperature shows
on the small display. (If the Temp pads
are held down the temperature will
change faster.)
PRESS YOU SEE
i j - n n
J
I_I
f
n ^ - U U
(example shows Bake at 375°F)
4. Press Cook Time pad.
YOU SEE
5. Set cook time.
Press the “up”
(A) or “down” (T) pad(s)
until the correct time shows on the
display.
PRESS YOU SEE
(example shows 30-mlnute
baking/roasting time)
continued on next page
25