Whirlpool MC8130XA User Manual

Page 69

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I F Y O U N E E D A S S I S T A N C E O R S E R V I C E

PROBLEM

POSSIBLE CAUSE

SOLUTION

The Display

shows

a

time

counting down
but the oven is

not cooking

The oven door is r>ot closed
completely.

You have set the controls as a
minute timer.

Completely close oven door.

Touch OFF/CANCEL to cancel the

Minute Timer.

You do not
hear the Pro­
gramming Tone

The command is not correct.

Re-enter command.

The fan seems
to be running
slower than

usual

The oven has been stored in
a cold area.

The fan will run slower until the oven
warms up to normal room tempera­
ture.

Foods
undercook

during convec­
tion and combi­

nation cooking

You have not followed the
recipe closely enough.

Foods are not prepared and
ready to place in the oven.

This increases heat loss from
the door being open.

Follow reliable recipes exactly for
ingredients, utensils, cooking time and

proper rack position.

Make sure foods are properly pre­

pared and ready to place in oven.

Smoke is
coming from
back of oven
during broiiing

This is normal, just as in
conventional broiling.

The microwave
oven turns off
too soon or not
soon enough
when using the
Temperature

Probe

Probe is not pushed far

enough into the food.

Probe is not positioned

correctly in the food.

When cooking roasts, you

have not let roast stand after

cooking.

Probe is not plugged in

correctly.

Cook Power is not set
correctly.

Probe temperature is not set

correctly.

Insert at least Va of probe into the

food.

Position probe tip in the center of the

food.

Allow roast to stand for a few minutes
after cooking.

Plug probe tightly into its socket.

Reset the Cook Power.

Reset the probe temperature.

The Display

shows 0”

There has been a power

interruption.

Reset the clock.

69

Advertising