Crestron electronic CHV-TSTATRF - Manual (Page 34)

infiNET™ Thermostat Crestron CHV-TSTATRF
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at
http://support.crestron.com .
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows  -based software tools to develop
an infiNET system. For the minimum recommended software versions, visit the
Version Tracker page of the Crestron website (
www.crestron.com/versiontracker ).
Programming with Crestron D3 Pro or
SystemBuilder
Crestron D3 Pro or SystemBuilder is the easiest method of programming but does
not offer as much flexibility as SIMPL Windows. For additional details, download
D3 Pro or SystemBuilder from the Crestron website and examine the extensive help
files.
NOTE: Heat pump and dual-fuel heat pump systems require an outdoor temperature
sensor (e.g. Crestron’s C2N-RTHS, sold separately) to function properly. Use a
“Connect” step to attach the sensor’s “Temp” output to the “OutdoorTemp” input of
the CHV-TSTATRF.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the CHV-TSTATRF, it is
recommended to use SystemBuilder or D3 Pro for configuring a system.
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.
Configuration Manager Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
• To incorporate the CHV-TSTATRF into the system, first drag the
C2N-MNETGW (MNET Gateway) from the Wireless Receivers | Wireless
Receivers (RF) folder of the Device Library and drop it in the System
Views. Then drag the module from the infiNET Control Modules | infiNET
Sensing Modules folder of the Device Library and drop it on the
C2N-MNETGW.
30 • infiNET™ Thermostat: CHV-TSTATRF Operations & Installation Guide – DOC. 6490A