Crestron electronic CHV-TSTATRF - Manual (Page 7)

Crestron CHV-TSTATRF infiNET™ Thermostat
Specifications
Specifications for the CHV-TSTATRF are listed in the following table.
CHV-TSTATRF Specifications
SPECIFICATION DETAILS
Wireless C2N-MNETGW gateway/transceiver required
(sold separately)
RF Transceiver Two-way RF, 2.4 GHz ISM Channels 11-26
(2400 to 2483.6 MHz),
IEEE 802.15.4 compliant
RF Output Power 10 mW
Range (typical) 150 feet indoor, 250 feet outdoor, subject to
site-specific conditions; range is increased by
adding additional devices or
C2N-MNETRPT repeater
Display Backlit LCD with two large seven-segment
digits, two small seven-segment digits, 14
dedicated symbols;
Displays ambient temperature, setpoint,
system mode, fan setting, call activity, low
battery, RF or control system communication
errors, firmware download progress, setup
parameter/function and value
Measurement Range
Ambient Temperature -10º to 110ºF (-23º to 43ºC)
Display Limits -9º to 99ºF (-9º to 43ºC)
Setpoint Range
Heat only setpoint 38º to 89ºF (3º to 32ºC)
Cool only setpoint 59º to 99ºF (15º to 37ºC) or
38º to 99ºF (3º to 37ºC) extended cool mode
enabled
Relay Rating 1 Amp @ 40 Volts DC or 24 Volts AC (nominal)
Environmental
Temperature -10º to 110ºF (-23º to 43ºC)
Humidity 10% to 90% RH (non-condensing)
Power Requirements 0.24 Watts (10 mA @ 24 Volts AC) supplied by
heating or cooling system
Battery Two AA batteries, estimated one year normal
operation (with power parameter set to “Steal
Power” setting)
Default MNET ID 01
Minimum 2-Series Control
System Update File
1, 2
Version 3.154 or later
Housing Injection molded plastic, surface-mountable to
the front of a horizontally oriented single-gang
electrical box.
Dimensions
Height 4.50 in (11.43 cm)
Width 5.53 in (14.05 cm)
Depth 1.03 in (2.60 cm)
(Continued on following page)
Operations & Installation Guide – DOC. 6490A infiNET™ Thermostat: CHV-TSTATRF • 3