Crestron electronic CHV-TSTATRF - Manual (Page 37)

Crestron CHV-TSTATRF infiNET™ Thermostat
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs or firmware) can be transferred to the control system (and/or device).
Finally, program checks can be performed (such as changing the device ID) to
ensure proper functioning.
Establishing Communication
Use Crestron Toolbox for communicating with the CHV-TSTATRF; refer to the
Crestron Toolbox help file for details. There is a single method of communication:
indirect serial communication.
Indirect Serial Communication
PC RUNNING
CRESTRON TOOLBOX
CONTROL SYSTEM
SERIAL,
ETHERNET
OR USB
infiNET
CRESNET
CHV-TSTATRF C2N-MNETGW
• CHV-TSTATRF connects to the C2N-MNETGW (Gateway), which
connects to the control system via Cresnet.
• Establish communications between the PC and the control system as
described in the latest version of the 2-Series Control Systems Reference
Guide (Doc. 6256).
Programs and Firmware
Program or firmware files may be distributed from programmers to installers or from
Crestron to dealers. Firmware upgrades are available from the Crestron website as
new features are developed after product releases. One has the option to upload
programs via the programming software or to upload and upgrade via the Crestron
Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help
file or the Crestron Toolbox help file.
SIMPL Windows If a SIMPL Windows program is provided, it can be uploaded to the control system
using SIMPL Windows or Crestron Toolbox.
Operations & Installation Guide – DOC. 6490A infiNET™ Thermostat: CHV-TSTATRF • 33