Cadillac SRX 2010 - Manual (Page 217)

Black plate (51,1) Cadillac SRX Owner Manual - 2010
Infotainment System 6-51
Accepting a Call
Turn the MENU/SELECT
knob to “Answer” and press the
MENU/SELECT knob to accept
the call.
Declining a Call
Turn the MENU/SELECT knob to
“Decline” and press the MENU/
SELECT knob to decline the call.
Switching Between Calls
(Call Waiting Calls Only)
To switch between calls:
1. Turn or press the
MENU/SELECT knob.
2. Select Switch Call from
the menu.
Conference Calling
Conference calling and three way
calling must be supported on the
bluetooth phone and enabled by the
wireless service carrier to work.
To start a conference while in a
current call:
1. Turn or press the
MENU/SELECT knob.
2. Select Enter Number.
3. Enter the character sequence
then select call. See “Entering a
Character Sequence” in
Operation on page 6‑7 for
more information.
4. After the call has been placed,
turn or press the MENU/
SELECT knob and choose
Merge Calls.
5. To add more callers to the
conference call, repeat steps 1
through 4. The amount of callers
that can be added are limited by
your wireless service carrier.
Ending a Call
Turn or press the MENU/SELECT
knob and select Hang Up.
Muting a Call
To Mute a Call
Turn or press the MENU/SELECT
knob and select Mute Call.
To Cancel Mute
Turn or press the MENU/SELECT
knob and select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in‐vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Turn or press the
MENU/SELECT knob and select
Enter Number.
2. Enter the character sequence,
see “Entering a Character
Sequence” in Operation on
page 6‑7 for more information.