Ride control systems, Traction control system (tcs), Ride control systems -34 – Cadillac SRX 2010 User Manual

Page 278: Traction control, System (tcs) -34

Advertising
background image

Black plate (34,1)

Cadillac SRX Owner Manual - 2010

8-34

Driving and Operating

Ride Control Systems

Traction Control
System (TCS)

The vehicle may have a Traction
Control System (TCS) that limits
wheel spin. On a front-wheel-drive
vehicle, the system operates if it
senses that one or both of the front
wheels are spinning or beginning to
lose traction. On an All-Wheel-Drive
(AWD) vehicle, the system will
operate if it senses that any of the
wheels are spinning or beginning to
lose traction. When this happens,
the system brakes the spinning
wheel(s) and/or reduces engine
power to limit wheel spin.

The system may be heard or felt
while it is working, but this is
normal.

TCS automatically comes on
whenever the vehicle is started. To
limit wheel spin, especially in
slippery road conditions, the system
should always be left on. But, TCS
can be turned off if needed.

TCS/StabiliTrak Light

d

flashes to indicate that the

traction control system is active.

If there is a problem detected with
TCS, “Service Traction Control” is
displayed on the Driver Information
Center (DIC). See Ride Control
System Messages on page 4‑38
.

When this message is displayed
and

d

comes on and stays on, the

vehicle is safe to drive but the
system is not operational. Driving
should be adjusted accordingly.

If

d

comes on and stays on, reset

the system by:

1. Stopping the vehicle.

2. Turning the engine off and

waiting 15 seconds.

3. Starting the engine.

If

d

still comes on and stays on, the

vehicle needs service.

Advertising