Cadillac SRX 2010 - Manual (Page 345)

Black plate (39,1) Cadillac SRX Owner Manual - 2010
Vehicle Care 9-39
Daytime Running Lamp (DRL)
(Up-Level)
To replace the Front Turn
Signal Lamp:
1. Remove the bottom cap for the
DRL bulb replacement from the
back of the headlamp assembly.
2. Disconnect electrical connector.
3. Remove the DRL bulb socket
from the headlamp assembly.
4. Replace the bulb in the bulb
socket.
5. Install the bulb socket in the
headlamp assembly.
6. Connect the electrical connector.
7. Install the cap with the down
arrow pointing down in the back
of the headlamp assembly.
8. For driver side, reinstall the
underhood electrical center
cover by latching three clips.
9. For passenger side, reinstall
the air filter/cleaner assembly
base by pushing to seat. Verify
the base is seated securely,
then install the engine air
filter/cleaner assembly.
Front Turn Signal Lamp
(Base and Up-Level)
To replace the Front Turn
Signal Lamp:
1. Remove the turn signal lamp
bulb socket from the headlamp
assembly.
2. Remove the turn signal lamp
bulb from the socket.
3. Replace the bulb in the bulb
socket.
4. Install the bulb socket in the
headlamp assembly.
5. For driver side, reinstall the
underhood electrical center
cover by latching three clips.
6. For passenger side, reinstall
the air filter/cleaner assembly
base by pushing to seat. Verify
the base is seated securely,
then install the engine air
filter/cleaner assembly.