Cadillac SRX 2010 - Manual (Page 99)

Black plate (3,1) Cadillac SRX Owner Manual - 2010
Storage 3-3
Additional Storage
Features
Cargo Cover
For vehicles with the dual position
cargo cover, it can be used to cover
items in the cargo area of the
vehicle.
Install the cargo cover
1. Hold the cartridge so that the
pull‐out shade faces the rear of
the vehicle.
2. Align the cartridge over the pins
on the trim panels of the vehicle.
3. Push down on the cartridge to
snap it into place.
4. Unroll the shade towards the
rear of the vehicle.
5. The shade can be set in two
positions. It can be set in a half
way open (A) position for loading
objects into the rear
compartment.
6. Pull cargo cover down to
lower (B) position to conceal
objects in the rear compartment.
7. Align the pins with the channels
on both sides.