Cadillac SRX 2010 - Manual (Page 390)

Black plate (84,1) Cadillac SRX Owner Manual - 2010
9-84 Vehicle Care
4. Turn the sealant canister (B) so
the inflator filling hose is aligned
with the slot in the compressor.
5. Lift the sealant canister (B) from
the compressor and replace with
a new sealant canister. See your
dealer for more information.
To install a new sealant canister:
1. Align the sealant/air hose (G)
with the slot in the air
compressor.
2. Push the sealant canister (B)
down and turn it clockwise.
3. Wrap the sealant/air hose (G)
around the air compressor
channel to stow it in its original
location.
4. Push the air compressor inflator
hose (F) onto the sealant
canister inlet and push the
lever down.
Tire Sealant and
Compressor Kit
(With Selector Switch)
System Identification
If the vehicle has the tire sealant
and compressor kit shown above,
see the operating instructions that
follow.