Kenmore SWA/RS 14501 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Insert the Bobbin into the Bobbin Case
1
. Insert the bobbin into the bobbin case with
the thread running counter clockwise.
2. Pull the thread through the slit in the
bobbin case.
3. a. Pull the thread underneath theiflA
tension spring. It will clock when it is in
place.
b. Pull 3 to 4 inches of the thread from the
bobbin case.
Insert the bobbin Case into the Shuttle
1. Hold the bobbin case by the latch, with the
locating groove downward.
2. Place the bobbin case onto the shuttle,
keeping the thread pulled toward you.
NOTE: Be sure the notch in the shuttle fits
into the groove of the bobbin case.
It will click when it is in place.
12
3. Fold the latch to the right to lock the
bobbin case in place.