Kenmore SWA/RS 14501 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Three-Step Zigzag
NOTE; Three-step zigzag takes three short
stitches, where regular zigzag takes
one.
• Choose this stitch to mend a tear or to
overcast a raw edge.
To Mend:
1. Put a piece of fabric under the tear to be
mended.
2. Stitch so that the fabric on both sides of
the tear is caught by the points of the
stitch.
To Overcast:
NOTE: See the instructions on page 30 for
zigzag stitch overcasting. The three-
step overcasting stitch is stronger
than the regular zigzag overcast
stitch. Use this stitch to keep fabric
from puckering.
Advertising
This manual is related to the following products: