Make the buttonhole – Kenmore SWA/RS 14501 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Make the Buttonhole
1. a. Carefully mark the buttonhole length on
your garment.
b. Mount the buttonhole guide onto the
presser foot with the letter "F" at the
front so that the rear edge of the presser
foot is at the end of the guide.
c. Insert the garment under the guide with
the buttonhole marking running toward
you.
NOTE; Line up the markings on the guide
with the length you have marked to
help you stitch accurately. Markings
are engraved in inches.
2. a. Set the stitch selector at U .
b. Sew 4 to 6 stitches.
c. Stop sewing at the left stitch.
3.
a. Set the stitch selector at ^|j .
b. Sew fon/vard until you reach the front
marking of your buttonhoie.
c. Stop sewing at the left stitch.
a. Set the stitch selector at u .
b. Sew 4 to 6 stitches.
c. Stop sewing at the right stitch.
5.
a. Set the stitch seiector at llf .
b. Sew until you reach the back of the
buttonhole.
c.
Remove the fabric and cut the hole
open with the buttonhole opener in your
accessory box.