Installation instructions – Kenmore ELITE 796.292796 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION INSTRUCTIONS
UNPACKING THE WASHER
When removing the washer from the carton base, be sure the
plastic tub support comes off with the base.
If you must lay the washer down to remove the base
packaging materials, always protect the side of the washer and
lay it carefully on its side. DO NOT lay the washer on its front
or back.
2. Remove the packing block containing the owner's manual,
parts, water hoses, and laundry product samples.
NOTE: Do not remove the foam block until the washer is at
the final location.
1. After removing the carton and shipping material, lift the
washer off the foam base. Make sure the plastic tub
support comes off with the base and is not stuck to the
bottom of the washer.