Typical chimney connection – Kenmore 5EW1.75 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TYPICAL CHIMNEY CONNECTION
MUST BE AT LEAST 4
INCHES THICK-
AND BE TIGHT.
MUST SLOPE UP
AT LEAST 1/4 INCH
PER FOOT OF
HORIZONTAL RUN
DRAWBAND
LAST PIECE
INSTALLED
MUST BE REQUIRED MIN
IMUM HEIGHT. MUST BE
AT LEAST 3 FT. HIGHER
THAN HIGHEST PART OF
PASSAGE THROUGH
ROOF. MUST BE AT
LEAST 2 FT. HIGHER
THAN ANY NEIGHBORING
OBJECT. MUST HAVE AN
UNOBSTRUCTED TOP
OPENING.
Advertising