Kenmore Microwave Oven - Manual (Page 10)

OVEN CONTROL PANEL
Convec Time — Used in
setting Convection Cooking
Time.
Dehydrate Time — Used in
setting Dehydration Cooking
Time.
Oven Temp/Pre-Heat — Used
in setting the desired Oven
Temperature, Pre-heat
Temperature or Dehydration
Temperature.
Stop Time — Used in setting a
Delay Start Cooking. Cooking
can be finished at the preset
stop time.
Used in setting Time of Day
Time of Day.
Micro Time — Used in setting
Microwave Cooking Time.
Numbers — Used to enter the
Time of Day, Delay Start Time,
Cooking Times, Cooking
Powers and Cooking
Temperatures.
Micro Control — Used to
select Microwave Cooking
Power Levels.
Clear — Clears all entries'
except Time of Day. Once
cooking has begun, however.
Clear will function only after
Stop has been touched.
jT«i2 ST*tf3 si«t4
'
«1«
STMt
wen
®«ITn
ra« rti* UC« CC»rtC
,
K Xpto Recip^SOO
, CLEAR 1 1 START 1 1 STOP
RECIPE # 1
'm rnm
r DBF 1 1
1 MEAT_______ J
DEF 2 K OEF 3
POULTRY J l\ FISH
MICRO TEMP
120" Rvt B m I.
CookM Ham
130* Medium Be«f
150* SovciCauefo*«
155* Veai
160* Meat Lost
165* WH Done LamO
170* Poultry Part»
180* Wno» Pouilry
OVEN
320*C*M»roier
Peheat
350* Bread
& Polls Poultry
Ouiche
SoulH«
Cookies
A Cakes
420*Pie Crust
450*Sleaks
A Chops
,Micro/Convec Time —
in setting Micro/Convec
Cooking Time.
Used
Used , Micro/Convec Temp
in setting the desired
Micro/Convec C,ooking
Temperature with Temperature
Probe.
• Convec Temp Used in
setting the desired Convection
Cooking Temperature with
Temperature Probe.
-Hold Warm — Used in setting
a Hold Warm. Cooked food can
be kept warm.
■ Pause — Used to stop Oven
between Cooking Stages.
'Memory/Recall — Used in
setting Cooking Time. Power
Level and Temperature for Two
or Three-Stage Cooking. Also
used to recall each memory
stage in a multiple stage
program.
'Micro Temp — Used in setting
the desired Microwave Cooking
Temperature. Temperature
Controlled Cooking can be done
only when the Temperature
Probe is plugged into the socket
inside the Oven.
'stop — Stops Oven.
' Start — Starts Oven.
'JOTE; A “beep tone” sounds when a “pad” on
the control panel is touched, to indicate
a setting has been entered.
10