Kenmore Microwave Oven - Manual (Page 50)

DELAY START COOKING
Delay Start Cooking can be done by starting the cooking
automatically and finishing at a presetting delay time for the
chosen cooking time on Microwave. Micro/Convec and
Convection or any combination cooking.
1. Touch CLEAR.
2. Touch STOP TIME.
Light below DELAY START
goes on. Display Window will
read “0:00”.
3. Touch numbers for the Time
of Day to finish cooking. For
example, touch numbers “7”,
“3” then “0” for the cooking to
be finished at “7:30”, and “7:30”
will show in the Display
Window.
1 .1
CSD
CO OC CSD
4. Touch MICRO TIME.
5. Touch numbers for Cooking
Time.
For example, set 12 minutes by
touching “1” then “2” then “0”
twice.
“200” will show in the display
window.
Lie
OC oc
6. Touch MICRO CONTROL.
7. Touch numbers for Cooking
Power level.
For example, touch numbers
“5” then “0”, “50” will show in
the display window.
C3C oc
8. Touch START.
The Time of Day will show in
the Display Window and Light
below DELAY START goes on.
As soon as the clock shows the
Cook Start Time which has
been subtracted from the Cook
Finish Time, the Oven will start
cooking and the cooking time
counts down in the Display
Window. When the Cook Finish
Time (or “7:30”) comes, the
Oven will shut itself off.
NOTE: A preset delay time
must be less than 12 hours.
* Four-Stage Cooking can be
used with Delay Start. After
step 3 above, follow
instructions for Four-Stage
Cooking beginning with step 2.
*The Delay Start Cooking is
controlled by time.
When Temperature Control
Cooking is set in a stage.
Cooking may be finished at the
setting time with a slight time
difference.
* Fresh food should not stand at
room temperature over four
hours prior to cooking.
The display shows
the time of day.
For example:
a half past two.
50