Preset recipe cooking – Kenmore Microwave Oven User Manual

Page 51

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Auto Recipe 300 plus 3 Customer Programmable Recipes

300 recipes shown in the cookbook have been stored in this oven. By touching the recipe number corresponding

to preset recipe, cooking can be done. These 300 recipes have been preset, so you can not erase or substitute
them.

PRESET RECIPE COOKING

Yo can program 3 more favorite recipes in Recipes #301-303.
See page 54 in this manual for programming new recipes.

*To cook one of 303 preset recipes, simply following the

steps below.

1. Touch CLEAR.

2. Touch RECIPE #.

“0” will show in the display window. .

3. Touch the correct numbers of Recipe found in your

Kenmore Microwave Cookbook.

EXAMPLE: If you cook “Hearty Cheese and Frank Soup of
Recipe #25”, touch “2” and then “5”.
The display window shows “25”.

NOTE: When you touch the numbers of Recipe #301-303,

the display window may flash, it means that no

preset recipe has been stored in the oven for that
recipe number.

4. Touch START.

The oven will begin cooking, and the display window
will show the time counting down.

Some preset cookings of “AUTO RECIPE 300” can
cook up to 4th stage.

NOTES:
• If “PAUSE” shows in the display window between stages,

a special requirement (i.e. stirring, turning over, rotating
and covering by following instructions in the cookbook)

is needed.

• If “PAUSE” does not show in the display window,

cooking in the stage cooking will start itself or the
cooking has been completed.

EXAMPLE: Hearty Cheese and
Frank Soup of Recipe #25.

The following program has
been stored into the oven.

(Stage 1; HI, 4 minutes)
(PAUSE)
(Stage 2; HI. 4 minutes)
(PAUSE)
(Stage 3; HI. 10 minutes)
(PAUSE) •

(Stage 50; 58-minutes)

1. Touch RECIPE #, “2” and

“5”.
The light at the right of

RECIPE in the display
window will go on, “25” will
show in the display window.

2. Touch START.

The first stage will begin. The

light below STAGE 1 will go
on and “400” will show in the
display window. The oven will
begin to cook at “HI” power

level and the time will begin
to count down in the display
window. When the 6 minutes
are over, a tone will sound
and the oven will stop.

3. “PAUSE” will show in the

display window.

At pause, stir by following the
instructions in the cookbook.

P S

Auto Rcclp* 300 I

CX

j

CECXD

E^cx:-cs

( Auto R«clpc 300

1

CSZ1CH3

gcsucSD

Auto Recipe 300

;siD

51

Advertising