Kenmore Microwave Oven - Manual (Page 28)

MICROWAVE
TWO, THREE OR FOUR-STAGE COOKING (Cont’d)
Second Stage (3 minutes;
power level 70)
6. Touch PAUSE. The light
below STAGE 2 will go on. The
display window will show “0”.
7. Touch MICRO TIME.
8. Set 3 minutes by touching
“3”, “0" and “0”. "300” will show
in the display window.
9. Touch MICRO CONTROL
and numbers “7” and “0”.
“70” will show in the display
window. .
The second stage has been set.
Third Stage (2 minutes;
power level 70)
10. Touch PAUSE. The light
below STAGE 3 will go on.
The display window will show
“
0
”.
11. Touch MICRO TIME.
12. Set 2 minutes by touching
“2”, “0” and “0”.
“200” will show in the display
window.
13. Touch MICRO CONTROL
and numbers “7" and “0”.
“70” will show in the display
window.
The third stage has been set.
Fourth Stage (5 minutes;
power level 0)
14. Touch MEMORY/RECALL.
The light below STAGE 4 will go
on.
The display window will show
"
0
” .
15. Touch MICRO TIME.
16. Sets minutes by touching
“5". “O’* and “0".
■‘500” will show in the display
window. The fourth stage has
been set.
'
LQ.;:
::oZ
:x:
L'Ol
-.J~S
rr:
j^z
Tze
zee
zt
28
17. Touch MICRO CONTROL
and number “0”.
“0” will show in the display
window.
The fourth stage has been set.
18. Touch START. The first
stage will begin cooking.
“1000” will show in the display
window. The oven will begin to
cook at power level 70 and the
time will begin to count down in
the display window. When the
10 minutes are over, a tone will
sound and the oven will stop.
“PAUSE” will show in the
display window.
After the pause, to restart the
oven, touch START for second
cooking stage. “300” will show in
the display window. The oven
will begin to cook at “70” power
level. When the 3 minutes are
over, a tone will sound and the
oven will stop. “PAUSE” will
show in the display window.
After the pause, to restart the
oven, touch START for third
cooking stage. "200” will show
in the display window. The
oven will begin to cook at “70"
power level. When 2 minutes
are over, a tone will sound and
the oven will change itself into
the fourth stage. "500” will
show the display window.
When 5 minutes as “Standing
time” are over, a tone will
sound and the word “End" will
show in the display window for
2 seconds.
The oven would have finished
four stage.
NOTE: If you want to keep
the food warm after finishing
the set cooking, you can use
“Hold Warm” feature. For
detailed instructions on using
"Hold Warm" feature. See
page 18,
’ "Standing time” allows the
food to finish cooking and the
heat to be uniform throughout.
See the cookbook for detailed
e.xplanation.