Connecting the unit, Connecting the power terminal, Connecting the speaker terminals – Pioneer GM-X952 User Manual

Page 8: Aansluitschema

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Connecting the Unit

Connecting the Power Terminal

• Always use the speeial red battery and ground

wire [RD-223], whieh is sold separately. Conneet
the battery wire direetly to the ear battery positive
terminal (+) and the ground wire to the ear body.

1. Pass the battery wire from the

engine compartment to the interior
of the vehicle.

• After making all other eonneetions to the

amplifier, eonneet the battery wire terminal
of the amplifier to the positive (+) terminal of
the battery.

Fuse (30 A) Engine

lienor of

compart-

the vehicle

ment

a

Fuse (30 A)

Positive terminal

Insert the O-ring rubber
grommet into the vehiele
body.

Drill a 14 mm
hole into the
vehiele body.

2. Twist the battery wire, ground wire

and system remote control wire.

Twist

3. Attach lugs to wire ends. Lugs not

supplied.

• Use pliers, ete., to erimp lugs to wires.

4. Connect the wires to the terminal.

• Fix the wires seeurely with the terminal

serews.

GND terminal

Connecting the Speaker Terminals

1. Expose the end of the speaker wires

using nippers or a cutter by about

10 mm and twist.

'Twist

10 mm

2. Attach lugs to speaker wire ends.

Lugs not supplied.

• Use pliers, ete., to erimp lugs to wires.

. Lug

^ Speaker wire

Aansluitschema

Zekering (30 A)

Doorvoerbuisje

Speeiaal rood aeeusnoer [RD-223] (los verkrijgbaar)
Sluit, nadat alle andere aansluitingen op de versterker zijn
gemaakt, het aeeusnoer-aansluitpunt van de versterker aan op
het po sitie ve aansluitpunt

(-I-)

van de aeeu.

Aardingssnoer (zwart) [RD-223] (los verkrijgbaar)
Sluit dit snoer aan op de earrosserie of het ehassis.

Luidspreker-aansluitpunt
Raadpleeg het hoofdstuk
“Aansluiten van de luidspreker-
draden” voor riehtlijnen i.v.m. het
aansluiten van luidsprekers.

Draad voor systeemafstandsbediening (los verkrijgbaar)
Verbind de mannelijke aansluiting van dit draad met de aansluiting
voor de systeemafstandsbediening van de autostereo (SYSTEM
REMOTE CONTROL). Het vrouwelijke aansluitpunt kan worden
aangesloten op het relais-besturingsaansluitpunt van de automatisehe
antenne. Als de autostereo niet besehikt over een systeem-afstandsbe-
dieningsaansluitpunt, sluit dan het mannelijke aansluitpunt aan op het
spanningsaansluitpunt via de eontaetsehakelaar.

Advertising