Select, Alpha or ctcss, Select chan - 8 - from 1 to 5d(d – Uniden UBC9000XLT User Manual
Page 24: 678£ф/(}& ch г, Nopqrstu ch 1, Select chan - from 1 to 560, Select alpha or ctcss, Inopqrstu, Nopqrstu, Bank a p ch local police select
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Press (
Select
ALPHA or CTCSS
Then press |
alpha
).
--------------------------------------------------------
Select chan - 8 -
from 1 to 5d(D'
2, Enter the channel number...
Note:
You must select a
programmed channel.
Example: Channel 1
Then press ¿
h
Edit Screen appears.
у The Alpha
from 1 to 500
678£ф/(}& ch Г
3. Turn the Rotary Tuner left/right
to choose a letter from the
upper line of characters.
Example: “L”
Press /
hol
5\ for uppercase
characters,
letters.
for lowercase
INOPQRSTU
Ch
1
Щ
NOPQRSTU
Ch
1
Repeat to choose more characters. You can enter up to 16 characters.
Note; Press I
auto
| to move the edit cursor on the lower line to the right.
Press I SBC I to move the edit cursor to the left.
4. Press [
e
I to program the
Alpha entry into the channel.
Bank A P ch
Local Police
Select
Chan -
from 1 to 560''''
You can program up to 250 channels with alpha characters. If you try to
program channels over 250, “FULL ALPHA MEM” appears in the screen.
Press C SCAN I j I ^ or C PROG ]to exit the Program Alpha mode.
To display the alpha characters, press [ while in the Scanning or
Manual Mode.
21