Using turbo search, Osrc, Nfm 5.0 khz 4 6.0150mhz – Uniden UBC9000XLT User Manual
Page 34: Using search delay
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Turbo Search
Turbo Search increases the search speed from 100 frequencies per
second to 300 frequencies per second in ranges where the frequencies
are spaced 5 kHz apart.
Use these keys:
While searching, press (njRBo).
OSRC
t
NFM 5.0 KHZ
4 6.0150MHz
Using Search Delay
On some two-way channels there might be short lapses in the signal
before a reply. The
Search Delay
feature causes the scanner to wait two
seconds after the end of a transmission before resuming searching, in
case there is a reply.
Unlike Scan Delay, you don’t have to turn on Search Delay for each
frequency in the search range. Search Delay works for the entire
frequency range you chose.
Press i paAY ) to turn Search Delay ON or OFF,
I
31