Using priority scan, Moving the priority channel, Ap'c'def i scan—l '57 0 – Uniden UBC9000XLT User Manual
Page 31: Sbank a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Priority Scan
You can program one Priority Channel in each ot the first 10 banks.
During Priority Scanning, your scanner checks these special channels
every two seconds, whether or not the scanner has located an active
channel.
Use these keys:
Scan, Mode, and Numeric Keys,
and Rotary Tuning Controls.
Press ( ™ ) .
You can turn Priority Scan ON in Scan
Mode or Manual Mode.
i
p
г п к
AP'C'DEF I
Scan—l '57 0
Moving the Priority Channel
The scanner is pre-programmed with the first channel of each bank as a
priority channel. However, you can change the priority channel to be any
other channel within the bank.
1. Press
2. Select the new priority channel.
Example: Press fa ] , then
[
mamual
} .
OR
Use the Rotary Tuner.
□Bank A ch 9
325.0500MHz
3. Press and hold (
) for two
seconds. You hear a beep.
SBank A
p
ch 9
325.0500MHz
28