Viewing scanner status information, Bank c ch step:12.5khz, Bank – Uniden UBC9000XLT User Manual
Page 45: Bank c ch 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When scanning stops on a channel that displays “Record”, the channel
will automatically be recorded.
To deselect a channel so that it is not recorded:
1. Display the assigned channel
on your screen.
Record ch 1
482.7625MHz
2. Press I Aux
“Record”
disappears on the
display to indicate that channel
will not be recorded.
Bank A P ch 1
482.7625MHz
Viewing Scanner Status Information
This leature lets you quickly review the settings for several features of the
UBC9000XLT. Use these key;
In Scan Mode:
1. Press
I
mwual
) ,
Bank
c
ch 72
854.2875MHZ
2. Press and hold [^^)fortwo
seconds. You hear two beeps,
then the status information
scrolls across the display.
Bank C ch 72
MODEiNFM
Bank C ch
STEP:12.5KHZ
72
42