Setting the signal mode, Status, numeric and special function keys – Uniden UBC9000XLT User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Setting the Signal Mode
Your scanner is capable of receiving three signal modes;
AM Amplitude Modulation
NFM Narrow Frequency Modulation
WFM Wide Frequency Modulation
Each of the scanner’s frequency bands is pre-programmed with a default
signal mode. If you want to override the default signal mode for a
particular frequency, use these keys:
IMlldCn ftUJlCa^UK*0№LT
f* If^Fc IIP irE >
fF imrTnmn i
Status, Numeric and Special Function Keys
1. Press
J .
2. Press the signal mode.
Example: [ «fF« I.
36
Advertising