Using signal attenuation, Bank d ch 83 855.9125mhz – Uniden UBC9000XLT User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Using Signal Attenuation
When the
ATT
LED is on, the incoming signal strength is attenuated
(reduced) by about 15 dB. This prevents unusually strong signals from
over-loading the scanner.
In the Scan Mode, you must individually program each channel you want
to use the Signal Attenuation feature. You can use the Signal Attenuation
feature in the Manual, Search, or Scan Mode.
Use these keys:
While Scanning:
1. Press I'-wju«-)
Bank D ch 83
855.9125MHz
2.
Press ( ATT ). The display does not change.
While Searching, press
I
37
Advertising