Remote control, Input balance adjustment, Surround level adjustment – Kenwood KR-V9020 User Manual
Page 29: Normal/wide, Phantom
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to make adjustments for the
Dolby Pro-Logic mode
CENTER MODE
key
TEST TONE
ON/OFF key
TEST TONE
MODE key
CENTER LEVEL ,
keys
REAR LEVEL keys .
BYPASS key
□□ iZD “
o
«
en
[ZD m □
DELAY TIME
[^ r^~i
CENTER LEVEL
[yn
VOLUME
REAR LEVEL CONTROL
MUTE
5
DELAY TIME
keys
Remote control
■ INPUT BALANCE adjustment
With this unit the INPUT BALANCE is adjusted automat
ically,
• 'This unit features an automatic input balance control,
eliminating the need to adjust L/R input balance for
different sources and optimizing performance of the
Dolby Pro Logic Surround decoding by minimizing
crosstalk/'
■ Surround Level adjustment
NORMAL/WIDE
1. Select "NORMAL" or "WIDE" with the CENTER
MODE key,
2. Press, the TEST TONE ON/OFF key on the remote
control at the listening position.
• Test noise will be heard,
3. Press the TEST TONE MODE key on the remote
control.
• Each time the key is pressed, the tone will be heard
from one of four positions in the following order:
LEFT
CENTER
RIGHT
REAR
4. Adjust the CENTER LEVEL and REAR LEVEL keys so
that the output volumes from the five speakers are
almost identical when listened from the listening posi
tion,
5. Press the TEST TONE ON/OFF key to OFF. '
PHANTOM
1. Select "PHANTOM" with the CENTER MODE key.
2. Press the TEST TONE ON/OFF key on the remote
control at the listening position.
• Test noise will be heard.
3. Press the TEST TONE MODE key on the remote
control,
• Each time the key is pressed, the tone will be heard in
one of three positions in the following order:
LEFT
RIGHT
REAR
4. Adjust the REAR LEVEL keys so that the output
volumes from the four speakers are almost identical
when listened from the listening position.
5. Press the TEST TONE ON/OFF key to OFF.