System connections, Connection of audio components – Kenwood KR-V9020 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System connections
Make connections as shown in the diagram below. When connecting the related system
components, refer also to the instruction manuals of the related components.
Do not plug in the power lead until all connections are complete.
Connection of audio components
Speaker system A
Right
Left
FM PE-EMPHASIS/
CHANNEL SPACE switch
(Except for some areas.)
Refer to the "Antenna
connections" section.
AC voltage
selector switch
(Except for some
areas,)
(Turntable using MM
cartridge)
LINE IN (REC)
LINE OUT
(PLAY)
CD player
Tape deck 2
Notes:
1. To prevent possible problems, always disconnect the power
plug or turn off the POWER key of the receiver before
connecting or disconnecting the cords.
2. When connecting the cords, always insert the pin plugs
securely into the connecting jacks.
• Insufficient insertion may result in no-sound or no- picture
problems or generation of noise.