Specifications, For the u.s.a, Fcc warning – Kenwood KR-V9020 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
AUDIO SECTION
Rated Power Output
(Front)
130 watts per channel minimum RMS, both channels
driven at 8 ohms, from 20 Hz to 20,000 Hz with no more
than 0.008% total harmonic distortion.
(Rear)
20 watts per channel minimum RMS, both channels driven
at 8 ohms at 1 kHz with no more than 0.9% total harmonic
distortion.
Total Harmonic Distortion
(1 kHz, 8 ohms at 130 W)................................................... 0.003%
Input Sensitivity/Impedance
PHONO (MM) ..................................... .........
.....2.5 mV/47 kohms
CD, TAPE ...................................................... .
200 mV/47 kohms
VIDEO..............................................................
250 mV/47 kohms
Frequency Response
CD......................................................... .
10 Hz-100 kHz
Signal-to-Noise Ratio (IHF-A)
PHONO (MM).................. .......................... ..............................
79 dB
CD, TAPE................ ................................................ .............
100 dB
VIDEO ...................................................... .............................
..90 dB
Graphic Equalizer
Center Frequencies .... ...........
60 Hz, 150 Hz, 400 Hz, 1 kHz,
2.4 kHz, 6 kHz. 15 kHz
Control Range ........... .................................. ..................
±12 dB
VIDEO SECTION
Television format.......................................................................... NTSC
VIDEO Inputs/Outputs ...............1 Vp-p, 75 ohms unbaianced
FM TUNER SECTION
Tuning Frequency Range .......... .................. 87.5 MHz- 108 MHz
Antenna Impedance ........................................75 ohms unbalanced
Sensitivity.........................IHF .... 1 0.8 dBf (0.95 /.(.V at 75 ohms)
Signai-to-Noise Ratio at 65 dBf (IHF)
MONO ......................................................................... . 80 dB
STEREO ........................... ......................................... ..............74 dB
Total Harmonic Distortion at 1,000 Hz
MONO ................................................................................. 0.1%
STEREO............................................................................... 0.2%
Frequency Response ............. .................30 Hz- 1 5 kHz
^2
q
dB
Stereo Separation ........... ................................... 50 dB at 1 kHz
Selectivity (±400 kHz).................. ............................................... 53 dB
AM TUNER SECTION
Tuning Frequency Range
530 kHz- 1,610 kHz
(with the AM tuning interval set at 1 0 kHz)
531 kHz- 1,602 kHz
(with the AM tuning interval set at 9 kHz)
Usable Sensitivity......... .................................. . 1 0 /
a
V/(400 yu,V/m)
Signal-to-Noise Ratio......... ....................... . 50 dB
Total Harmonic Distortion ..................... ...............0,3%
Selectivity................. ....... ............................. .............................. 25 dB
GENERAL
Power Consumption
.........5A................. USA and Canada Models
..... 500 W................ .......... ..............Others
Dimensions
.............. ......... 440 (W)
X
1 62 (H)
X
420 (D) mm
(17-5/16")
X
(6-3/8")
X
(16-9/16")
Weight (Net)
........................................................ 14.7 kg (32.4 lb)
Note: ----------------- --------------------------------------------------- ---------------------- -----------------------------------------------------------------------------------------------———
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
For the U.S.A.
FCC WARNING:
This equipnnent may generate or use radio frequency energy. Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the
authority to operate this equipment if an unauthorized change or modification is made.