Toshiba TEC B-30 Series User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Installing the supply roll holder on the right side of the printer (except for B-30-S3/
AS3 with Rewinder unit).
a. Remove the cover of the supply roll holder unit, then remove the supply spool
from the supply stand.
b. Attach the supply stand to the right side of the printer using the two wing screws.
c. Mount the supply spool by inserting it into the horizontal mounting holes of the
supply stand.
d. Attach the cover by inserting it horizontally from the side of the supply stand.
EM 1-33004
3. INSTALLING THE SUPPLY STOPPER B
Install supply stopper B on the supply roll holder unit when using the narrow supply.
Supply Stopper B
3-2