Toshiba TEC B-30 Series User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EM 1-33004
6. MOUNTING THE LOCK AND ADJUSTMENT KNOBS (for Cutter type only)
insert each knob. (Align the groove of the knob with the pin on the shaft.)
NOTICE: When inserting the adjustment knob, make sure that the triangular indicator (Á) points to “55” on
the scale.
B Adjusting the cutting position
1. Turn the lock knob to the unlock position.
2. Set the adjustment knob to the designated position.
3. Turn the lock knob to the lock position.
2nd scale: 30 mm ~ 54 mm
3rd scale: 15 mm, 20 mm ~ 25 mm
7. INSTALLING THE STACKER (for Cutter type only)
Assemble the stacker and hang the tabs of the stacker on the tag exit.
3-4