1 for standard type, For on-demand type (for b-30-h1/h2 only) – Toshiba TEC B-30 Series User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
EM 1-33004
1. REMOVING THE JAMMED SUPPLIES
1.1 For Standard Type
1. Open the front door.
2. Move the head lock lever to the right to release the print head.
3. Remove the supplies jammed inside.
Head Lock Lever
1.2. For On-demand Type (for B-30-H1/H2 only)
1. Open the front door.
2. Move the head lock lever to the right to release the print head.
3. Turn and hold the backing roller lever, and pull the backing paper.
Figure 5-2.
5-1
Advertising