Toshiba TEC B-30 Series User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EMI-33004
Problem
Solution
No print.
1. Check whether the supply or ribbon is loaded correct
ly or not.
2. Check whether the print head is set correctly or not.
3. Check whether the memory card is inserted correctly
or not.
4. Check whether the interface cable is connected
correctly or not
Printed characters are
unclear (or blurred).
1. Dirty print head. Clean the print head.
2. Bad ribbon. Change to new ribbon.
3. Wrong supply for printing. Change to new supply.
Power is not turned
ON.
1. insert the power plug into the AC outlet firmly.
2. Check the circuit breaker.
3. Check whether the printer fuse is blown or not.
This printer has been manufactured under strict quality control. If you have any
trouble, however, DO NOT ATTEMPT TO FIX IT BY YOURSELF. Turn the power
off, pull the power plug out of the AC outlet, and contact your TEC representative.
5-6