Toshiba TEC B-30 Series - Manual (Page 3)

INTRODUCTION
PRECAUTIONS
CONTENTS
EM 1-33004
Thank you for choosing the TEC Bar Code Printer B-30-AS3. The B-30-AS3 has been
developed for issuing various kinds of bar codes, and can be connected to a personai
computer, etc., via a TEC interface. The B-30-AS3 adopts a state of the art thermai
printer so that it produces iess noise and more cleariy printed characters. You can
easily select either the thermal transfer or thermal direct printing method.
This manuai contains information about the general set-up and maintenance of the
B-30-AS3 printer, and should be read carefully to obtain maximum performance from
your printer. Since ample consideration has been given to safety, there is no danger
of damaging the printer by erroneous operation.
Should you have any questions concerning the printer, please refer to this manual.
Be sure to keep this manual for future reference.
1. Clean the cover by wiping with a dry cloth or a cloth soaked with detergent and
thoroughly wrung out. NEVER USE THINNER OR OTHER VOLATILE SOLVENT
for cleaning.
2. DO NOT POUR WATER directly on the printer.
3. When in use, avoid locations subject to vibration and direct sunlight.
4. Properly use the TEC-specified label, tag, and ribbon.
5. DO NOT STORE the labels, tags, and ribbons in locations exposed to direct
sunlight, high temperature, high humidity, dust, or gas.
6. Place the printer on a level surface.
CHAPTER 1 SPECIFICATIONS
CHAPTER 2 BEFORE STARTING UP
CHAPTER 3 INSTALLING THE PRINTER
CHAPTER 4 OPERATION
CHAPTER 5 MAINTENANCE
APPLICABLE MODEL
B-30
B-30
B-30
B-30
B-30
B-30
B-30
B-30
B-30
B-30
B-30
B-30-
B-30
B-30
B-30-
-S1-EU, UK, US, EU P, UK P, US P
-H1-EU, UK, US, EU P, UK P, US P
-C1-EU, UK, US, EU P, UK P, US P
-S2-EU, UK, MA, EU P, UK P
-H2-EU, UK, MA, EU P, UK P
-C2-EU, UK, MA, EU P, UK P
•S3-US P, AU P, UK P.
H3-AU P
C3-AU P
AS2-US P
AS3-EU, UK. MA, EU P, US P
AH3-EU
S5-US P
AS5-US P
DS2-UK P