Procedure before operation, Procedure before operation -8, Name of key function – Toshiba TEC EM1-31059 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. NAME AND FUNCTION OF EACH PART
EM1-31059
3.4 KEY LAYOUT
Name of Key
Function
FEED Key
FEED
This key is used to feed labels or report paper.
TEST Key
TEST
This key is used to issue test labels.
ZERO Key
ZERO
This key is used to adjust the ZERO point.
4. PROCEDURE BEFORE OPERATION
1.
Connect the Power Cord to the AC inlet on the scale and plug in.
2.
Adjust the Level Gauge. (See page 5-1.)
3.
Connect a PC Keyboard if necessary. (See page 7-1.)
4.
Turn on the power.
5.
Load the Label or Receipt. (See page 6-1.)
6.
Check the status of initial setting and bar code format, then programming menu No. 3, 1 and
4.
If required, execute the programming menu No. 2, 8, 9, 11, 14, 15, 17 and so on.
7.
Check the date of the scale before operation every day. (See page 7-17.)
8.
Make a test print before operation every day.
(1) Turn the control key to REG. position.
(2) Press
TEST
Key, and the test label is issued.
9.
Recall the PLU which contains the unit price used in weighing mode, and place a weight on
the platter and check a correct price is displayed for the preset unit price.
10. Label issued is ready.
3- 8