Level adjustment, Removal and replacement of label roll, Level adjustment -1 – Toshiba TEC EM1-31059 User Manual
Page 17: Removal and replacement of label roll -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. LEVEL ADJUSTMENT
EM1-31059
5. LEVEL ADJUSTMENT
5. LEVEL ADJUSTMENT
Set the scale on a stable and level surface.
Level the scale by turning the adjustable legs so
that the air bubble is inside the center circle.
Level Gauge
Correct
incorrect
When the air bubble moves toward the left side,
turn the right adjustable legs clockwise.
1
When the air bubble moves toward rear, turn the
front adjustable legs clockwise.
6. REMOVAL AND REPLACEMENT OF LABEL ROLL
1.
Remove
the
printer
cover
and
right
side
cover. Then push the head-up lever in the
direction indicated by the arrow.
Pull out the label cassette and remove the
core of the label roll and the label backing
paper.
NOTE:
To remove the label backing paper,
loosen the paper by turning the
paper winding shaft
counterclockwise and remove the
paper stopper.
Label Cassette
5- 1