Cisco 700 - Manual (Page 101)

Provisioning the ISDN BRI Line C-5
International Data and Voice Application Terminology
The data and voice applications described in the section “Data and Voice” earlier in this
appendix might be referred to by different names, depending on the service provider and
your location. The terms can differ even within a country. Some international service
providers might use codes instead of names to refer to the data and voice applications.
Table C-2 lists the names and codes that might be used outside North America to refer to
data and voice applications.
National ISDN Capability Packages
A capability package is a set of standardized features that simplifies the process of
configuring an ISDN line. The capability package ordering codes described in this section
apply to NI1.
Note The Cisco 765, Cisco 766, Cisco 775, and the Cisco 776 require two SPIDs for the
analog telephone ports to operate correctly.
Capability Package S
Package S provides alternate voice and circuit-switched data with no additional features.
When a minimum feature set is needed, Package S is the preferred NI1 capability package
for Cisco 765, Cisco 766, Cisco 775, and Cisco 776 routers.
Table C-2 ISDN BRI Data and Voice Applications—Terms
Used Outside North America
North AmericaName Other Names Code
Call hold and retrieve Call hold CH HOLD
Call waiting Anklopfen 1
1 Germany only.
CW
Multiple subscriber numbers Extended addressing
Selection directe a l’arrive
2
2 France only.
SDA MSN