Cisco 700 - Manual (Page 70)

ISDN BRI Cause Values
Cisco 700 Series Router Installation Guide 5-8
28 001C Invalid number
format The connection could be established because the
destination address was presented in an
unrecognizable format or because the destination
address was incomplete.
29 001D Facility rejected The facility requested by the user cannot be
provided by the network.
30 001E Response to
STATUS
ENQUIRY The status message was generated in direct
response to the receipt of a status inquiry
message.
31 001F Normal,
unspecified Reports the occurrence of a normal event when no
standard cause applies. No action required.
34 0022 No circuit/channel
available The connection cannot be established because no
appropriate channel is available to take the call.
38 0026 Network out of
order The destination cannot be reached because the
network is not functioning correctly, and the
condition might last for an extended period of
time. An immediate reconnect attempt will
probably be unsuccessful.
41 0029 Temporary failure An error occurred because the network is not
functioning correctly. The problem will be
resolved shortly.
42 002A Switching
equipment
congestion The destination cannot be reached because the
network switching equipment is temporarily
overloaded.
43 002B Access information
discarded The network cannot provide the requested access
information.
44 002C Requested
circuit/channel not
available The remote equipment cannot provide the
requested channel for an unknown reason. This
might be a temporary problem.
47 002F Resource
unavailable,
unspecified The requested channel or service is unavailable
for an unknown reason. This might be a
temporary problem.
Table 5-2 ISDN BRI Cause Values and Cause Messages (continued)
Cause
Value
1
Hex
Value
2 Cause Message Definition