Configuration for router only on isdn line, C-13 – Cisco 700 User Manual
Page 109
Provisioning the ISDN BRI Line C-13
Configuration for Router Only on ISDN Line
Table C-10 lists the router configuration requirements when using the router only on a
Northern Telecom DMS-100 ISDN line.
Configuration for Router and One Additional Device on ISDN Line
Table C-11 lists the router configuration requirements for using a Northern Telecom
DMS-100 switch when using the router and one additional device on the ISDN line.
Note
In this configuration, the router can use only one B channel.
Table C-10
Northern Telecom DMS-100—Router Only
Parameter
Configuration
Software Command
Router software
U.S. version
Note
1
1
This parameter is not set with a software command.
Switch type
DMS
set switch
SPIDs
Two required
set spid
Directory number
Two required
set directory number
Table C-11
Northern Telecom DMS-100—Router and One Additional
Device
Parameter
Configuration
Software Command
Router software
U.S. version
Note
1
1
This parameter is not set with a software command.
Switch type
DMS
set switch
SPIDs
One required
set spid
Directory number
One required
set directory number